Our Products
PTFE FILLED PTFE MOULD/STOCK SHAPES
MOULD PTFE ALSO FAMOUS AS PTFE STOCK SHAPES. WE CAN PROVIDE PTFE MOULDS/MOULDING RANING FROM 10MM ID TO 1000MM OD. WE CAN PROVIDE PTFE MOULDS/MOULDING RANGING FROM UPTO 300MM HEIGHT.
GAS AND AIR COMPRESSOR SPARES FOR HIGH PRESSURE
Manufacturer & Exporter of a wide range of products which include Air Compressors such as Air Cooled Compressors, Lubricated Compressor, Screw Air Compressors, High Pressure Air Compressors, Reciprocating Air Compressors, Piston Air Compressors and many more items.
CARBON FILLED PTFE BEARING ELEMENT
Carbon has good chemical resistance to corrosive environments. It exhibits good initial wear and rubbing or sliding contact characteristics, both dry and water applications. It is frequently used in piston rings to reduce cylinder wall wear by entrapping abrasive foreign particles in their relatively soft surfaces.
PTFE ROD AND TUBES IN CONTINUOUS LENGTH
PTFE Rod is often chosen to produce bearings because of its very low friction and also for its free running ability. Because of its ability to conform to shape otherwise known as flow, PTFE Rod is used for seals in valves, this is because it can conform to shape and create a high specification valve seal.
COMPRESSOR REPLACEMENT PARTS FROM PTFE (O.E EQUIVALENT)
We are one of the well-reputed and established manufacturers and suppliers of an high quality array of PTFE Compressor Parts. These are manufactured using superior quality material which ensures durability.The filled Teflon® (PTFE) that we process are suitable for serving nearly every identifiable market at both the OEM and after-market levels. These can also be employed by plastics distributors and machine shops that serve OEM's. The Parts display exemplary performance characteristics and have a long service life even under critical conditions.
PTFE SHEET
PTFE Sheet is often chosen for very low friction sideways and wears blocks. PTFE Sheets can provide very low resistance with mating components to offer a free running sideway surface requiring minimal momentum to move products or components. PTFE Sheet is also used in lining of cryogenic chambers due to its excellent and rare ability with very low temperatures.
TURCITE EQUIVALENT MATERIAL
Quite simply – Turcite ® is PTFE impregnated with fillers and additives that serve to enhance the wear properties of the material. It is used, most often in a sheet form, in thicknesses ranging from 0.5mm (0.02”) to 4mm (0.16”), although in some applications, it is also used as a bush and in more rare applications it is used as a thick plate.Being based on PTFE, the material cannot be extruded like a normal plastic sheet and instead needs to be “skived” – the process most commonly used to make thin PTFE sheets.
PTFE GASKET
gasket are available in 1.5 mm, 2 mm & 3 mm, 4 mm, 5 mm thick. Gaskets are manufactured to suite different flange standard like; E/F table, ANSIB-16.5-150, 300 & 600. Class flange, “DIN” standard flanges from 1/2” NB (15NB) to 28” NB. PTFE gaskets are available in raise face size & full face size. PTFE gaskets are also available as per client drawing specification.
PTFE RING
We are one of the leading manufacturers of a wide range of PTFE Ring Gasket. Our range of PTFE ring and gasket is manufactured using molding method with PTEF method with PTEF granular resin. PTFE, compared with other plastics, has superior properties against chemicals and temperature. The PTFE ring & gasket offered by us is highly admired by all our clients due to their high reliability as well as durability. These ring joint gaskets are especially designed to withstand exceptionally high assembly loads over a small area, thus producing high seating stresses.
PTFE O RING
Still have questions about finding a standard or non-standard o-ring size? Feel free to either contact us with your questions or use our online o-ring size search.
PTFE ENVELOPE GASKET (WITH AND WITHOUT ASBESTOS PACKING)
It excels at sealing irregular surfaces and maintaining a tight seal under demanding processing and system conditions.
PTFE BALL VALVE SEAT
We are among the leading manufacturers, suppliers and exporters of wide range of high quality PTFE Ball Valve Seats. These products undergo various quality assurance procedures at each level of their productions, to ensure high standards of quality and safety. These products are chemically inert to attack by most chemicals. These products are available in standard sizes that best suits the requirement of our valuable customers. These products are available in various grades for our valuable customers. We believe in effective and timely delivery of these products once ordered, owing to vast network of our dedicated employees.
PTFE BACK UP RING
Back-up rings are normally supplied as a spiral of two turns. This enables the back-up ring to be opened with ease for fitting over a shaft, and ensures the 'O' ring is supported around its entire diameter. Single turn back-up rings can also be supplied, and these are usually endless to ensure good support. However, they can be scarf split if required, although we do not recommend this because extrusion can occur at the split.Smaller sizes of back-up rings are available only as a single turn. This is because spiral back-up rings need an inside diameter of 3mm or greater for machining purposes.
PTFE GUIDE STRIP
Guide strip/ring have an important place in hydraulic and pneumatic systems. If there are radial loads in the ysytem and no protections are provided, sealing elements do not function and also there may be permanent damage for the cylinder. BST guide strip are produced with PTFE filled with 40% Bronze, standard smooth surface or structuralization coining surface for options.
PTFE PISTON SEAL AND ROD SEAL
Produced with a combination of special compound PTFE ring and 70 shore NBR O-ring, our BSJ design has a wide application area. Being able to be usded safely at high linear velocity,BSJ type seals can also work in higher temperatures or different liquids by means of changing o-ring used as pressure ring.
PTFE BALLS
Our PTFE Balls are perfectly used, where metals or alloys cannot be used. PTFE Plastic Balls are highly functional in self-lubrication conditions such as ball bearings. Today, we are counted among the key PTFE Balls Manufacturers and Suppliers in India. Solid PTFE Balls are available in size range of 6mm to 10mm or according to the specifications of our customers.
PTFE BELLOWS
Bellows are specially designed from virgin PTFE and is contour molded. This manufacturing method guarantees an excellent structure of the material; symptoms of ageing are practically excluded.
PTFE SLEEVES
PTFE Insulated Sleeve application is for high temperature or high frequencies or both. PTFE Sleeve and teflon sleeve possesses excellent electrical properties, which remain practically constant over a wide range of frequencies, temperature (-600 to +2600 C) and humidities and has a very low loss factor.
SPRING ENERINGSED SEAL
Spring Energised seals are single acting seals which are used for dynamic and static applications.They are effective in a wide range of applications. They are chosen when higher resistance to chemical media is required, if the seal is required to operate in extremes of temperature and where good extrusion and compression characteristics are needed.
PTFE LIP SEAL
The widest product range in the sector Due to their elastomer sealing lip, standard radial shaft seals have only a limited application range with respect to pressure , temperature and media loads.